Leaders in High Efficiency, High Reliability Power Supplies
Find a local partner| Consult an engineer| Contact Excelsys



Join Our Mailing List

Category

News

Basic Requirements for a Power Supply Platform

Category: UltiMod Xgen Date: 20th October 2014

Basic Requirements for a Power Supply Platform Excelsys Technologies has been at the forefront of power supply design and manufacture for many years now. With its two decades of experience in configurable power supply design, the company is supremely well-placed to support the building of power supply infrastructure, and to advise businesses on the ideal [...]

Read More...

Excelsys Technologies Xsolo and XF MIL COTS Power Supplies now meet CE101 and CE102 Conducted Emission Standards

Category: Other News Date: 14th October 2014

Excelsys Technologies Xsolo and XF MIL COTS Power Supplies now meet CE101 and CE102 Conducted Emission Standards   Excelsys Technologies, specialists in high efficiency user configurable power supplies, are delighted to announce that our recently released Xsolo and XF power supply ranges now meet CE101 and CE102 conducted emission standards by combining with the ASTRODYNE-LCR F19374 High [...]

Read More...

Power Supply Implementation for MOOP and MOP

Category: UltiMod Xgen Date: 9th October 2014

Power Supply Implementation for MOOP and MOP Companies operating in the medical field often require complex electrical devices. And this equipment is very strongly regulated. Yet understanding the requirements of these regulations can be confusing and complex, so this blog post will be focused on the Means Of Protection (MOP) which are outlined in the [...]

Read More...

Electromagnetic Interference and Power Supply Selection (2)

Category: LED UltiMod Xgen Date: 1st October 2014

When trying to minimise the impact of electromagnetic interference (EMI), the layout of  the Printed Circuit Board (PCB) is of critical importance. Yet, ironically, when designing for EMI, PCB layout is often one of the least understood factors. However, actually taking EMI into consideration need not be particularly complicated. Observing a few key points can [...]

Read More...

New 1KW XSolo and UltiMod Power Supplies from Excelsys Take Centre Stage at Electronica 2014

Category: Other News Date: 30th September 2014

New 1KW XSolo and UltiMod Power Supplies from Excelsys Take Centre Stage at Electronica 2014 Hall B2 Booth 219 Excelsys Technologies, are delighted to announce that we will be exhibiting at Electronica 2014 in Munich from the 11th to 14th of November. Located in Hall B2, Booth 219, the Excelsys booth is bigger than ever [...]

Read More...

Electromagnetic Interference and Power Supply Selection (1)

Category: LED UltiMod Xgen Date: 25th September 2014

Electromagnetic Interference and Power Supply Selection (Part 1) Electromagnetic interference (EMI) can be a major problem for any business working with electrical equipment for one simple reason. EMI is everywhere. EMI is a consistent feature of the Earth’s ecosystem, which unfortunately provides many natural sources of electromagnetic interference. Additionally, the sun is also a huge [...]

Read More...

Voltage Sag Regulations and Excelsys Power Supplies

Category: UltiMod Xgen Date: 23rd September 2014

Voltage Sag Regulations and Excelsys Power Supplies Electrical equipment that is to be utilised within a factory setting naturally needs to possess an extremely high level of power quality. Aside from the important safety requirements, all power supplies within an industrial environment require very high levels of power quality due to the sensitivity of equipment [...]

Read More...

Using the Xgen and UltiMod platforms in harsh environments and the use of conformal coating.

Category: UltiMod Xgen Date: 19th September 2014

Using the Xgen and UltiMod platforms in harsh environments and the use of conformal coating. Conformal coating can be used to increase environmental pollution degreess in which the Xgen and UltiMod series can be designed into. Not only will it prevent short circuits and corrosion of conductors and solder joints, it will minimize dendritic growth [...]

Read More...

Podcast: The Challenges in Power Systems Design Today

Category: Other News Date: 10th September 2014

Podcast: The Challenges in Power Systems Design Today   In this podcast Shane Callanan of Excelsys talks to Alix Paultre of Power Systems Design about the challenges in power systems design today. Many engineers have to create ever more efficient and energy-dense power supplies for their products, but may not have the expertise to create [...]

Read More...

Excelsys Exhibiting at SINDEX 2014

Category: Other News Date: 26th August 2014

Excelsys Exhibiting at SINDEX 2014 SINDEX is the largest technology fair in Switzerland and will take place from 2nd to 4th of September in Bern. At  SINDEX 2014, over 400 exhibitors present the latest trends and technologies – from single components to complete solutions, from plug to the simulation tool. SINDEX covers an extremely wide range of [...]

Read More...