Leaders in High Efficiency, High Reliability Power Supplies
Find a local partner| Consult an engineer | Contact Excelsys          excelsys google plus excelsys linkedin excelsys facebook

Menu

Excelsys Size And Reliability Clinch Marine Application

Excelsys Size And Reliability Clinch Marine Application

When EPC labs, premier manufacturers of shipboard Thermal Graphic Recorders and Data Acquisition Systems needed a custom power supply fast – they found it, on www.excelsys.com. A visit to the simple to use online power supply configurator soon confirmed that Excelsys had a viable solution. Taking the unique part number provided by the configurator EPC contacted the nearest Excelsys distributor who was able to assemble and configure the power supply to EPC’s custom voltage and current needs. The supply was then dispatched within 24 hours using the distributor’s stock of modular, off-the-shelf components.

The delivered custom product performed exactly as advertised. From prototype runs to full-scale production orders, each Excelsys supply is built with the identical process to ensure the highest quality. Compared to alternative designs, the Excelsys solution for EPC reduced the required parts, improved efficiency, and saved space. EPC’s previous design had an AC/DC input module plus filter, 2 full brick DC/DC and 2 half brick DC/DC converters. Excelsys’ configurable modular design enabled consolidation into a single 1U AC input chassis with 4 output modules, with the added benefit of a 20% reduction in cost.

With power sources that can range anywhere from good to poor, shipboard environments can be challenging. The EPC application required a PSU that would tolerate a wide input range of varied quality for use in countries around the world. Excelsys offered a supply with a universal input of 85-265V that filled the bill. EPC’s immediate application was submarine based. Overall size and reliability were of critical concern, as was the quality of the DC outputs when under load. The EPC product required four different outputs to drive the various systems of the recorder. The Excelsys modular system offered the flexibility to build a supply that would deliver a clean source at 150W for the system’s sensitive 3.3-5V logic plus two, independent, high current 24V supplies for operating the system’s thermal printhead. Finally, a third 24V module was used for driving a stepper motor circuit, which is a highly inductive load. The system’s printhead is actually two separate arrays of resistive pixels that demand up to 10A of inrush current each. Average current consumption can run around 8.5A. The average resistance of each element array can be different, so the availability of fully isolated outputs with a wide trim range to balance each side was a major benefit. The superior performance and flat characteristics of the Excelsys modules enabled a reduction of the external surge capacitors from 11000uF to 1000uF with consequent space and cost savings. EPC also manufactures a line of smaller plotters with single-array printheads. Configuring the Excelsys supply for use in these systems was as simple as just removing a module from the chassis.

EPC’s thermal printheads are driven by a unique strobe sequence that produces up to 256 levels of gray per element, with loads pulsed at 100-1000 microseconds at varied duty cycles. To test the power supply, EPC ran worst-case load conditions with highest contrast ratio and under maximum print speeds. Power supply reliability is extremely important for EPC, as a failure can shut down an expensive ocean survey, requiring a trip back to port.

EPC Labs President John Curley comments, “We really like the way Excelsys modular AC/DC supplies are scalable and easily configured for future system designs. Based on the performance and flexibility of the Excelsys system, we will be able to easily plan our design cycles for future products. Our end customers will also be able to easily field upgrade and service an Excelsys modular power supply. Either EPC or our end customers can hold parts in stock for upgrades and scheduled maintenance.”

Editors note: Attached image shows the EPC Model 1086NT which uses the Excelsys 2740 Power Supply in marine survey applications all over the world.

About EPC

EPC Labs, Inc.has a 40 year history of manufacturing and selling shipboard Thermal Graphic Recorders and Data Acquisition Systems for use in a wide variety of custom applications including, side-scan sonar, sub-bottom profiling and spectrum analysis of ocean floors and communication surveillance. EPC’s products are used in oceanographic surveys by oil and gas companies, as well as in surveillance applications by military agencies throughout the world. System Application: Data acquisition (normally sonar) with thermal printout on 10 or 20 inch wide paper at 200 dpi (dots per inch) with 2-256 levels of gray, used primarily in shipboard operations.

December 2007

Website Search

CoolX Modular Power Supply

Category

catalogue